| Step | | Procedure & Parts & Tools |
| 1 |
|
REMOVE THE POWER CORD FROM THE CORD HOOK.
|
| 2 |
|
UNHOOK THE VAC HOSE FROM THE HOSE HOOK.
|
| 3 |
|
SLIDE UP ON THE BAG COVER LATCH. PULL THE BAG COVER FROM THE MACHINE.
|
| 4 |
|
PUSH IN ON THE RED LEVER ON THE RIGHT SIDE TO UNLOCK THE BAG.
|
| 5 |
|
PULL THE BAG DOWN OFF THE INTAKE HOSE.
|
| 6 |
|
LOCATE THE 5 SCREWS ON THE BACK OF THE VAC (VISIBLE AFTER REMOVING THE BAG). REMOVE THE 5 SCREWS.
| Screwdriver-phillips |
|
|
| 7 |
|
REMOVE THE SCREW HOLDING THE BRUSH TOOL HOLDER.
| Screwdriver-phillips |
|
|
| 8 |
|
PULL TO REMOVE THE HANDLE ASSEMBLY FROM THE VAC
|
| 9 |
|
LAY THE HANDLE ASSEMBLY DOWN AND REMOVE THE 4 SCREWS
| Screwdriver-phillips |
|
|
| 10 |
|
REMOVE THE BACK PANEL ON THE HANDLE ASSEMBLY
|
| 11 |
|
LOCATE THE SWITCH. THERE ARE 2 BLUE WIRES AND 1 GREEN/YELLOW WIRE.
|
| 12 |
|
LOCATE THE CONNECTOR AT THE BOTTOM OF THE HANDLE. SLIDE THE COVER OFF THE CONNECTOR. THERE ARE 3 WIRES, 2 BLUE AND 1 GREEN/YELLOW.
|
| 13 |
|
PLACE 1 LEAD ON ONE OF THE BLUE WIRES AT THE SWITCH.
| Volt meter (True RMS capable) |
&Width=100)
|
|
| 14 |
|
FOLLOW THE BLUE WIRE FROM THE SWITCH TO THE CONNECTOR. PLACE THE OTHER LEAD ON THE BLUE WIRE AT THE CONNECTOR. SET THE VOLT METER TO CONTINUITY. IF THE WIRE IS OKAY, THE VOLT METER WILL BEEP. CONTINUE THIS PROCESS FOR THE OTHER BLUE WIRE AND THE GREEN/YELLOW WIRE.
| Volt meter (True RMS capable) |
|
|